Tools

Weld Mount AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 6030

AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 AdhesivesAT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives. (sold separately)

Sea-Dog Emergency Deck Fill Plug

Emergency Deck Fill PlugNitrile-Buna RubberThis Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel resistant...

Sea-Dog Inboard Motor Flush

Inboard Motor FlushMolded Rubber/Aluminum Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine’s service life. Easy-to-use by fitting the rubber cup over the...

Sea-Dog Rectangular Motor Flush

Rectangular Motor FlushMolded PVC/Painted Steel Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups...

Jabsco Compact Impeller Removal Tool up to 2-1/4"

Compact Impeller Removal Tool up to 2-1/4"Features:Avoids damage to the pumpSimple to useAll stainless steelWARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause...

Sea-Dog Stainless Impeller Puller - Large

Stainless Impeller Puller - LargeInvestment Cast 316 Stainless Steel.Dimensions:Width: 3-3/4"Height: 6-3/4"Thread: 7/16" WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or...

Sea-Dog Stainless Impeller Puller - Small

Stainless Impeller Puller - SmallAllows easier removal of flexible impellers from a pump. Tighten the side grips onto the impeller hub and turn the center screw shaft to pull the impeller out of the pump. Available in 2 sizes. WARNING: This product can...

Sea-Dog Canvas Snap Tool

Canvas Snap Tool Canvas Snap Tool includes a die wrench and three removable dies for various snap caps and studs. Great addition to any tool box. Aluminum/steel construction. Not for use with heavy duty stainless canvas snaps. WARNING: This product...

GROCO Thru-Hull Installation Tool

Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer.  Slide the thru-hull fitting, flanged end first, over the tool.  (It...

GROCO Spanner Wrench/Deck Plate Key

Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes. Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveniently near the strainer(s) location...

Whitecap Pro Dual Feed Motor Flusher w/Rectangular Cups

Pro Dual Feed Motor Flusher with Rectangular CupsFeatures:Dual Feed Motor FlusherRectangular Cups Included

Whitecap Universal Motor Flusher w/Rectangular Cups

Universal Motor Flusher with Rectangular CupsFeatures:Universal Motor FlushRectangular Cups Included