Rigging

C. Sherman Johnson Eye to Deck Toggle Fitting

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

C Sherman Johnson Eye to Jaw Fitting

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

C. Sherman Johnson Eye to Eye Adjustable Fitting

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

C. Sherman Johnson Shore Adjuster f/3/16" Wire

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:3/16" Wire1/4" Pin1" adj.

C. Sherman Johnson Short Adjuster f/1/8" Wire

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifications:1/8" Wire1/4" Pin1" adj.

C. Sherman Johnson "T" Style Toggle Jaw f/3/16" Wire

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

C. Sherman Johnson "T" Style Toggle Jaw f/1/8" Wire

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

C. Sherman Johnson "T" Style Deck Toggle f/3/16" Wire

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

C. Sherman Johnson "T" Style Deck Toggle f/1/8" Wire

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

C. Sherman Johnson Double Threaded Interlocking Gate Eye f/3/16" Wire

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

C. Sherman Johnson Double Threaded Interlocking Gate Eye f/1/8" Wire

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

C. Sherman Johnson Interlocking Swivel Gate Eye f/3/16" Wire

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.