Rigging

C. Sherman Johnson Double Jaw Rigging Toggle - 5/16" Pin

Double Jaw Rigging Toggle - 5/16" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and mechanical fittings. All sizes include pins...

C. Sherman Johnson Closed Body Jaw to Swage Tubular Turnbuckle f/1/8" Wire

Closed Body Jaw to Swage Tubular Turnbuckle for 1/8" WireJaw to swage- Check Nut Locking.Specifications:1/8" Wire1/4" Pin3" adj.

C. Sherman Johnson Lever Arm Crimper Tool

Lever Arm Crimper ToolC. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are...

Barton BPG-50 Bulkhead Pipe Gland 50mm OD

BPG-50 Bulkhead Pipe Gland 50mm ODThe Barton Bulkhead Pipe Gland BPG-50 is for pipes with an outer diameter between 45-50mm (13/4 – 2″). The required hole cutter is 60mm. It has 4 M6 fasteners...

Barton Traveller System - Size 1

Traveller System - Size 1Pre-packaged mainsheet systems with all components required in one complete kit - sliding bolt track, traveller, end fittings, plastic end caps, pilot track, and full...

Barton Marine Size 3 Vang System

Size 3 Vang SystemFeatures:Snap Shackle Head24' Line

Barton 32mm Towable Genoa Car 2:1 Purchase - Black

32mm Towable Genoa Car 2:1 Purchase - BlackBarton Marin's sleek range of Genoa is designed to run on a 32mm (1-1/4”) T Track. All are manufactured from high-grade aluminum with our unique Spectro...

Barton Spinnaker Pole Slide Car (32mm)

Spinnaker Pole Slide Car (32mm)Features a heavy-duty stainless steel ring welded to an attachment plate, which is through-bolted to the slide. Generous ring opening to accept most pole ends.Plain...

Barton 4mm Dyneema Loop w/High Load Eye - 12mm Bore

4mm Dyneema Loop with High Load Eye - 12mm BoreThe Barton high-load eye with loop is available in three sizes and can be used in various applications on board, including barber hauler, preventers,...

Barton Genoa Slide Car (25mm)

Genoa Slide Car (25mm)Designed with a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks.Plain bearing genoa cars,...

Barton Size 2 4:1 Vang System, Swivel Head

Size 2 4:1 Vang System, Swivel HeadUpgrade your existing Vang system or use it as a boom preventer. Snap shackle fixings allow for quick and easy deployment. Professionally spliced and assembled...

Barton 32mm HD Pin Genoa Car Heavy Duty w/Plunger Stop - Black

32mm HD Pin Genoa Car Heavy Duty with Plunger Stop - BlackBarton Marine's sleek range of Genoa is designed to run on a 32mm (1-1/4”) T Track. All are manufactured from high-grade aluminum with our...