Electrical Accessories

Ancor Self-Extinguishing Split Loom 1/2" x 100

Self-Extinguishing Split Loom 1/2" x 100'Features:Permits flexible routing of cable harnessesProvides abrasion protection for wire and cableAllows lead-outs at any point for the greatest ease of...

Ancor Self-Extinguishing Split Loom 1/2" x 10

Self-Extinguishing Split Loom 1/2" x 10'Features:Permits flexible routing of cable harnessesProvides abrasion protection for wire and cableAllows lead-outs at any point for the greatest ease of...

Ancor Self-Extinguishing Split Loom 3/8" x 100

Self-Extinguishing Split Loom 3/8" x 100'Features:Permits flexible routing of cable harnessesProvides abrasion protection for wire and cableAllows lead-outs at any point for the greatest ease of...

Samlex 2500W Inverter Install Kit

2500W Inverter Install KitThe DC-2500-KIT-XL Inverter Installation Kit contains a pair of 15′ heavy duty cables and a 300A fuse assembly that is used to connect the inverter to the battery bank. The...

Victron SolidSwitch 104 f/DC Loads Up To 70V/4A

SolidSwitch 104 for DC Loads Up To 70V/4AFeatures:The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low-power digital signal.The DC load can be resistive,...

Victron GX Touch 50 Adapter f/CCGX Cut-Out

GX Touch 50 Adapter for CCGX Cut-OutThis adapter is designed to easily replace the CCGX display with the newer GX Touch. Contents of the packaging are the metal bracket, the plastic bezel, and four...

Victron GX Touch 70 Wall Mount

GX Touch 70 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount...

Victron GX Touch 50 Wall Mount

GX Touch 50 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, other than the three screws that fix the wall mount...

Victron GX Touch 70 Surface Mount Display - 7"

GX Touch 70 Surface Mount Display - 7"The GX Touch 70 is a display accessory for our Cerbo GX. The seven-inch touch screen display gives an instant overview of your system and allows you to adjust...

Victron GX Tank 140 Tank Monitoring f/4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not Included

GX Tank 140 Tank Monitoring for 4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not IncludedThe GX Tank 140 takes readings from up to four tank level sensors. It is an accessory for our...

T-Spec V10-D104K 4 Gauge Add-A-Amp Kit f/1/0 Gauge Wire

V10-D104K 4 Gauge Add-A-Amp Kit for 1/0 Gauge WireIf you've already installed a 1/0 AWG amplifier wiring kit in your boat, the T-Spec V10-D108K 4 AWG wiring kit will let you add another amplifier to...

T-Spec V10-2041 4 Gauge Amp Wiring Kit - 20 (6.1 M)

V10-2041 4 Gauge Amp Wiring Kit - 20' (6.1 M)A marine amplifier has to stand up to the rigors of life on the water, and so does the wiring kit you use with it.  The T-Spec V10-2041 Amp Kit is ideal...