D Size

RAM Mount Large Cable Manager f/2.25" Diameter Ball Bases

RAM Large Cable Manager f/2.25" Diameter Ball BasesThe RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any surface mounting application. The RAM Cable Manager is made of...

RAM Mount Handle Wrench f/"D" Size Ball Arms & Mounts

RAM Handle Wrench for "D" Size Ball Arms & MountsThe RAM handle wrench is designed to be used with the knob found on "D" size ball arms and mounts. The wrench matches the shape of the knob found on the side of "D" arms, and lets you give the arm an...

RAM Mount RAM Round Plate w/Ball - 2.25" - D Size Ball - Hole Plate

RAM® Round Plate with Ball - 2.25" - D Size Ball - Hole PlateThe RAM-D-254-WD1U consists of a 2.25" diameter rubber ball, connected to a 2.5" diameter plate containing 7 holes total: the industry standard 4-hole AMPS hole pattern and a 3-hole...

RAM Mount D Size Short Double Socket Arm f/2.25" Ball Base

The RAM-D-201U-C, short double socket arm, has a socket at both ends that accommodates 2.25" ball bases. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. This socket technology allows for almost...

RAM Mount Double U-Bolt Base w/D Size 2.25" Ball f/Rails 1.25" - 1.5" Diameter

Double U-Bolt Base with D Size 2.25" Ball for Rails from 1.25" - 1.5" in DiameterThe RAM-D-235-1U consists of a double u-bolt base with 2.25" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from 1.25" to 1.5" in...

RAM Mount D Size 2.25" Ball on Round Plate w/AMPS Hole Pattern

D Size 2.25" Ball on Round Plate with AMPS Hole PatternThe RAM-D-254U consists of a 2.25" diameter rubber ball, connected at right angles to a 2.4375" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180...

RAM Mount 2" x 5" Rectangle Base w/2.25" Ball

2" x 5" Rectangle Base with 2.25" BallThe RAM-D-202U-25 consists of a 2.25" diameter rubber ball connected at right angles to a 2" x 5" rectangular base. This mount has pre-drilled holes at each corner of the base.Features:Material: Powder Coated Marine...

RAM Mount Mixed Combination Pin-Lock Security Nut & Key Knob f/2.25"/3.38" Diameter D/E Size Arms

Mixed Combination Pin-Lock Security Nut and Key Knob for 2.25"/3.38" Diameter D/E Size ArmsThe RAP-S-NUT5U consists of a 1/2"-20 female threaded security nut and key knob. The RAP-S-NUT5U replaces all knobs on 2.25"/3.38" diameter D/E size arms and...

RAM Mount 3.68" Diameter Base w/2.25" D Size Ball

The RAM-D-202U consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round plate. The plate has pre-drilled holes in the base plate, including two holes at 180 degrees and three holes at 120 degrees. Material: Powder...

RAM Mount Double U-Bolt Base w/D Size 2.25" Ball for Rails from 1" to 1.25" in Diameter

Double U-Bolt Base w/D Size 2.25" Ball for Rails from 1" to 1.25" in DiameterThe RAM-D-235U consists of a double u-bolt base with 2.25" diameter ball and two stainless steel u-bolts. The double u-bolt base will accommodate rails from 0.75" to 1.25" in...

RAM Mount RAM Large Round Plate w/6-Hole Pattern Ball

RAM® Large Round Plate with 6-Hole Pattern & Ball The RAM-D-202U-SYM1 consists of a 2.25" diameter rubber ball, connected at right angles to a 3.68" diameter round base.  There are 6 pre-drilled holes in the base.Features:Plate Size -...

RAM Mount RAM Steel Reinforced 100x100mm VESA Plate w/Ball

RAM® Steel Reinforced 100x100mm VESA Plate with BallThe RAM-D-246U-IN1 consists of a 2.25" rubber ball, connected to a 4.75" square plate with 4x100mm holes and 4x75mm holes in each corner. Features:Steel reinforced square plate features the VESA...