Fuel Systems

Attwood Outboard Fuel Filter f/3/8" Lines

Outboard Fuel Filter for 3/8 inch LinesProtect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors.Features: Use with 3/8 inch fuel linesWorks...

Attwood Deck Fill f/Pressure Relief Systems - Angled Body Scalloped Stainless Steel Cap

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure...

Attwood Johnson/Evinrude/OMC Female Hose Fitting - Tank Or Engine End - 3/8" Barb

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 3/8" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features:Johnson, Evinrude,...

Trident Marine 5/8" Type A2 Fuel Vent Line Hose - Black - Sold by the Foot

5/8" Type A2 Fuel & Vent Line Hose - Black - Sold by the FootTrident 5/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant...

Attwood Honda 3/8" Barb Female Hose Fitting - Engine End

Honda 3/8" Barb Female Hose Fitting - Engine EndThis Attwood Engine-End Hose Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included...

Attwood Honda Fuel Line Kit - 3/8" Diameter x 6 Length

Honda Fuel Line Kit - 3/8" Diameter x 6' LengthThis EPA-certified Attwood Honda Fuel Line Kit reliably delivers fuel to your Honda engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter...

Trident Marine 3" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow w/4 T-Bolt Clamps

3" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have...

Attwood Deck Fill f/Carbon Canister System - Straight Body Scalloped Chrome Cap

Deck Fill for Carbon Canister System - Straight Body & Scalloped Chrome CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief...

Attwood Deck Fill f/Pressure Relief Systems - Straight Body Scalloped Stainless Steel Cap

Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure...

Attwood 316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent

316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a...

Trident Marine 1-1/2" Type A2 Fuel Fill Hose - Sold by the Foot

1-1/2" Type A2 Fuel Fill Hose - Sold by the FootTrident 1-1/2" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). Features: Sold by the foot This hose is built with the best fuel, fire,...

Trident Marine 1-1/2" Flex Marine Wet Exhaust Water Hose - Black - Sold by the Foot

1-1/2" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone,...